Installation guide

Assembly Replacement
A5 10 GB Hard Drive (Option 005)
2-18
A5 10 GB Hard Drive (Option 005)
Tools Required
• T-10 driver
Removal Procedure
Refer to Figure 2-9 for this procedure.
1. Disconnect the power cord.
2. Remove the front panels. Refer to “Front Panel” on page 2-6.
3. Using the T-10 driver, remove the four screws (1).
4. Lift and remove the A5 10 GB Hard Drive (Option 005) from the display panel’s sheet metal.
Replacement Procedure
1. Reverse the order of the removal procedure.
2. Torque all T-10 screws to 9 in-lbs.
3. Perform the post-repair adjustments and performance tests that pertain to this removal procedure.