User`s guide

User’s Guide 21
E4438C Option H13 Signal Studio for WiMAX
Instruments View
Instruments View
Instruments view specifies the instrument list for downloading the generated waveform
data. Up to 10 instruments are listed.
Display Instruments View
To display the Instruments View, select “Instruments” from the Tree View on the left side.
The “Instruments” node is always located on second line from the top tree-node. (Below
“Quick Setup”)
Figure 13 Instruments View
Parameters
• #: Instrument number. Current instrument number will be shown at the left side of the
Status Bar.
• State: Selects whether this instrument is active or not. If not selected, downloading will
not be performed.
• Result: Displays the result from “Test Connection”.
• Type: Connection type (LAN or GPIB).
• Host Name or IP: Sets the host name or IP address when using LAN to connect the
instrument.
• GPIB Board #: GPIB board number that is installed on the user’s PC.