Installation guide

Getting Started
Administration of Service Support Software
1-21
Figure 1-16 Using the Open Dialog Box to Search for a Datapack File to Add
The selected driver should now be displayed in the Datapacks dialog box, as seen in Figure 1-15.
4. Click Close (Figure 1-15).
Removing Datapacks
Removing datapacks is accomplished using the Datapacks dialog box. Refer to Figure 1-17.
1. Select the datapack (.000) file to be removed.
Figure 1-17 Removing a Datapack Using the Datapacks Window
2. Click Remove.
3. Click Close.