Technical data

1Getting Started
Product at a Glance
22 E364xA User’s and Service Guide
Use the front panel key to:
• Select the GPIB or RS- 232 interface.
• Set the GPIB address.
• Set the RS- 232 baud rate and parity.
Display annunciators
Figure 1-6 Display annunciators
5 GPIB (IEEE-488) interface connector
6 Rear output terminals
Table 1 - 5 Rear panel overview (continued)
No Description
I/O
Config
Table 1 - 6 Display annunciators overview
Item Description
Adrs The power supply is addressed to listen or talk over a remote interface.
Rmt The power supply is in the remote interface mode.
8V
[1]
/35V
[2]
Indicate that the low voltage range is selected.
20V
[1]
/60V
[2]
Indicate that the high voltage range is selected.