User`s guide

Chapter 4 Remote Interface Reference

Output Setting and Operation Commands

INSTrument:COUPle[:TRIGger]?

This query returns the currently coupled output. Returns “ALL”, “NONE”, or

a list. If any output is not coupled, “NONE” is returned. If all of three

outputs are coupled, “ALL” is returned. If a list of outputs is coupled, the list

is returned.

Measurement Commands

MEASure:CURRent[:DC]? [{P6V | P25V | N25V}]

This command queries the current measured at the output terminals of the

power supply. The physical outputs of measurement are specified by the

output identifier. If any output identifier is not specified, the current of the

currently selected output is returned.

MEASure[:VOLTage][:DC]? [{P6V | P25V | N25V}]

This command queries the voltage measured at the output terminals of the

power supply. If any output identifier is not specified, the voltage of the

currently selected output is returned.