Specifications

Chapter 4 77
Preparation for Accurate Measurement
Calibration
4. Preparation for Accurate Measurement
Calibration Data Array/Calibration Coefficient Array
The calibration data array contains Open/Short/Load/Low-loss capacitor measurement data
in the complex format. This measurement data is used for calculating calibration
coefficients. The calibration coefficient array contains calibration coefficients in the
complex format. They are calculated by using the calibration data array.
The calibration data and coefficient arrays can be read. The calibration coefficient array,
once read, can be written back again.
Read Calibration Data Array
For details on how to read the calibration data array, refer to “Read Calibration Data
Array” on page 77.
Read and Write Calibration Coefficient Array
For details on how to read and write the calibration coefficient array, refer to “Read and
Write Calibration Coefficient Array” on page 77.
Clear Calibration Data and Coefficient Arrays
The following GPIB command can be used to clear the calibration data and coefficient
arrays and disable the calibration function.
• SENS:CORR1 on page 419