Specifications

Appendix D 587
Table of corresponding 4291B vs. E4991A GPIB commands
Table of Corresponding GPIB Commands
D. Table of corresponding 4291B vs. E4991A GPIB commands
Returns the limit test result of the fail points. DATA? LFA Combines the following commands in
execution.
CALC{1-5}:MARK:REF:FUNC:DO
M:LIM:RES? on page 331
CALC{1-5}:MARK:REF:X on
page 334
CALC{1-5}:MARK:REF:FUNC:DO
M:LIM:UP on page 332
CALC{1-5}:MARK:REF:FUNC:DO
M:LIM:LOW on page 330
CALC{1-5}:MARK{1-8}:FUNC:DO
M:LIM:RES? on page 317
CALC{1-5}:MARK{1-8}:X on
page 338
CALC{1-5}:MARK{1-8}:FUNC:DO
M:LIM:UP on page 318
CALC{1-5}:MARK{1-8}:FUNC:DO
M:LIM:LOW on page 316
Returns the limit test result of all measurement points. DATA? LLIS CALC{1-5}:MARK:FUNC:DOM:LIM
:ALL:RES? on page 315
(However, only returns the overall
decision result of all test markers and
cannot even read the test conditions.)
Returns the limit test result at the marker. DATA? LMAR Uses the following commands to read
the marker position test result. However,
the test conditions cannot be read.
CALC{1-5}:MARK{1-8}:FUNC:DO
M:LIM:RES? on page 317
CALC{1-5}:MARK:REF:FUNC:DO
M:LIM:RES? on page 331
Returns the selected memory array. DATA? MEM None
Returns the stimulus array (scalar). DATA? SPAR SWE:STIM{1-4}? on page 512
Returns the value at a specified point. DATA:VAL? None (Cannot specify a measurement
point to read data.)
Sets the fixture compensation standard arrays. DATA:DEF Combines the following commands in
execution. However, there is no load
standard array. In addition, open
standard is defined as G-B and short
standard as R-X.
SENS:CORR2:CKIT:STAN1:LIST:B
on page 443
SENS:CORR2:CKIT:STAN1:LIST:G
on page 444
SENS:CORR2:CKIT:STAN2:LIST:R
on page 446
SENS:CORR2:CKIT:STAN2:LIST:X
on page 447
Clears the fixture compensation standard array. DATA:DEL None
4291B feature 4291B GPIB command E4991A GPIB command