Specifications

Appendix C 577
GPIB Command List By Function
GPIB Command List By Function
C. GPIB Command List By Function
Marker Turns off all makers. CALC{1-5}:MARK:AOFF on
page 305
Turns on/off marker coupling function. CALC:MARK:COUP on page 309
Movement mode (Continuous/Discrete) CALC{1-5}:MARK:DISC on page 309
Objective trace selection (Data trace/Memory trace) CALC{1-5}:MARK:ON on page 327
Marker 1-8 On/Off CALC{1-5}:MARK{1-8} on page 304
Sets to active marker. CALC{1-5}:MARK{1-8}:ACT on
page 305
Sets/reads stimulus value. CALC{1-5}:MARK{1-8}:X on
page 338
Reads measurement value. CALC{1-5}:MARK{1-8}:Y? on
page 339
Reference marker On/Off CALC{1-5}:MARK:REF on page 328
Sets to active marker. CALC{1-5}:MARK:REF:ACT on
page 329
Sets/reads stimulus value. CALC{1-5}:MARK:REF:X on
page 334
Sets/reads measurement value (Fixed Δ mode only). CALC{1-5}:MARK:REF:Y on
page 335
Δ mode Selects mode (Off/Δ/Fixed Δ) CALC{1-5}:MARK:REF:TYPE on
page 333
Sets sweep parameter by using stimulus/measurement value at active marker. CALC{1-5}:MARK:SET on page 336
Turns on/off marker list function, CALC{1-5}:MARK:LIST on page 326
Statistical analysis
function
On/Off CALC{1-5}:MST on page 343
Reads analysis result. CALC{1-5}:MST:DATA? on page 344
Selects format when reading measurement value (Complex trace only). CALC{4-5}:MARK:FORM on
page 310
Set unit of stimulus value at marker position. CALC{1-5}:MARK:UNIT on page 337
Limit test function On/Off CALC{1-5}:MARK:FUNC:DOM:LIM
:ALL on page 314
Marker 1-8 Turns on/off test marker. CALC{1-5}:MARK{1-8}:FUNC:DO
M:LIM on page 313
Upper limit of limit test CALC{1-5}:MARK{1-8}:FUNC:DO
M:LIM:UP on page 318
Lower limit of limit test CALC{1-5}:MARK{1-8}:FUNC:DO
M:LIM:LOW on page 316
Reference marker Turns on/off test marker. CALC{1-5}:MARK:REF:FUNC:DO
M:LIM on page 329
Upper limit of limit test CALC{1-5}:MARK:REF:FUNC:DO
M:LIM:UP on page 332
Lower limit of limit test CALC{1-5}:MARK:REF:FUNC:DO
M:LIM:LOW on page 330
Reads test results. For all markers CALC{1-5}:MARK:FUNC:DOM:LIM
:ALL:RES? on page 315
For specified marker 1-8 CALC{1-5}:MARK{1-8}:FUNC:DO
M:LIM:RES? on page 317
For reference marker CALC{1-5}:MARK:REF:FUNC:DO
M:LIM:RES? on page 331
Displays test condition/test results for each marker. DISP:TEXT{1-3}:SET on page 356
Function Item to be set or executed GPIB command