Specifications

Appendix C 575
GPIB Command List By Function
GPIB Command List By Function
C. GPIB Command List By Function
Calibration Calibration kit Selects Load standard (7-mm/User-defined/Dielectric
material measurement).
SENS:CORR1:CKIT on page 420
Defines standard value
by user.
Turns on/off list setting
function.
SENS:CORR1:CKIT:LIST on
page 421
Defines
impedance
value using
list setting.
Open (G) SENS:CORR2:CKIT:STAN1:LIST:G
on page 444
Open (B) SENS:CORR1:CKIT:STAN1:LIST:B
on page 424
Short (R) SENS:CORR1:CKIT:STAN2:LIST:R
on page 427
Short (X) SENS:CORR1:CKIT:STAN2:LIST:X
on page 428
Load (R) SENS:CORR1:CKIT:STAN3:LIST:R
on page 431
Load (X) SENS:CORR1:CKIT:STAN3:LIST:X
on page 432
Defines
impedance
value
without
using list
setting.
Open (G) SENS:CORR1:CKIT:STAN1:G on
page 423
Open (C) SENS:CORR1:CKIT:STAN1:C on
page 422
Short (R) SENS:CORR1:CKIT:STAN2:R on
page 429
Short (L) SENS:CORR1:CKIT:STAN2:L on
page 426
Load (R) SENS:CORR1:CKIT:STAN3:R on
page 433
Load (L) SENS:CORR1:CKIT:STAN3:L on
page 430
Defines
Load
standard
value for
dielectric
measurement
(Option
002).
Relative
permittivity
SENS:CORR1:CKIT:STAN7:PRE on
page 435
Dielectric loss
factor
SENS:CORR1:CKIT:STAN7:PLF on
page 434
Thickness SENS:CORR1:CKIT:STAN7:THIC
on page 436
Calibration
data/calibration
coefficient
Data measurement points SENS:CORR1:COLL:FPO on
page 438
Measures calibration data. SENS:CORR1:COLL on page 437
Clears calibration data array/calibration coefficient array. SENS:CORR1 on page 419
Calculates calibration coefficients and turns on calibration
function.
SENS:CORR1:COLL:SAVE on
page 439
Electric length
compensation
Test fixture Selects test fixture (Agilent test fixture/Custom). SENS:CORR2:FIXT on page 454
Reads electrical length of Agilent test fixture. SENS:CORR2:FIXT:EDEL:MODE:
DIST? on page 455
Sets/Reads electrical length of custom test fixture. SENS:CORR2:FIXT:EDEL:USER:D
IST on page 456
Other than test fixture Sets offset time delay due to port extension. SENS:CORR2:EDEL:TIME on
page 453
Function Item to be set or executed GPIB command