Specifications

572 Appendix C
GPIB Command List By Function
GPIB Command List By Function
Measurement
conditions
Only Segment sweep Segment sweep table Add segment. SEGM:COUN on page 397
Delete all segments. SEGM:DEL:ALL on page 406
Number of
measurement
points
Setting SEGM{1-16}:SWE:POIN on page 413
Read total
number.
SWE:POIN on page 511
Frequency
sweep range
Start value SEGM{1-16}:FREQ:STAR on
page 409
Stop value SEGM{1-16}:FREQ:STOP on
page 410
Center value SEGM{1-16}:FREQ:CENT on
page 407
Span value SEGM{1-16}:FREQ:SPAN on
page 408
Oscillator
current level
Mode On/Off SEGM:CURR:STAT on page 402
Output level SEGM{1-16}:CURR on page 398
Oscillator
voltage level
Mode On/Off SEGM:VOLT:STAT on page 418
Output level SEGM{1-16}:VOLT on page 414
Oscillator
power level
Mode On/Off SEGM:POW:STAT on page 412
Output level SEGM{1-16}:POW on page 411
dc bias
(Fixed
current
source)
(Option 001)
On/Off SOUR:CURR:OFFS:STAT on
page 465
Mode On/Off SEGM:CURR:OFFS:STAT on
page 399
Output level SEGM{1-16}:CURR:OFFS on
page 401
Maximum
voltage limit
SEGM{1-16}:VOLT:LIM on page 415
dc bias
(Fixed
voltage
source)
(Option 001)
On/Off SOUR:VOLT:OFFS:STAT on
page 484
Mode On/Off SEGM:VOLT:OFFS:STAT on
page 417
Output level SEGM{1-16}:VOLT:OFFS on
page 416
Maximum
current limit
SEGM{1-16}:CURR:LIM on page 400
Number of point averaging SEGM{1-16}:AVER:COUN on
page 396
Sets parameter values
collectively for a specified
segment number.
SEGM{1-16}:DATA on page 403
Sets parameter values
collectively for all segments.
SEGM:DATA:ALL on page 405
Delay time for each segment SWE:DWEL3 on page 510
Sets frequency span display (Sort by frequency/For each
segment).
DISP:TRAC{1-5}:X:SPAC on
page 363
Turns on/off the segment sweep table. DISP:TEXT{1-3}:SET on page 356
Function Item to be set or executed GPIB command