Specifications

52 Chapter 3
Setting Measurement Conditions
Set Display Scale
Log Y-Axis Format
Use the following GPIB commands to set the maximum and minimum values of the scale.
Polar Format
Use the following GPIB command to set the scale value of the outermost circle.
• DISP:TRAC{1-5}:Y:FULL on page 367
Complex Plane Format
Use the following GPIB commands to set the X-axis and Y- axis reference values and a
full-scale value.
Smith Chart and Admittance Chart
The scales of these formats are fixed and thus cannot be changed.
Display format Parameter to be set GPIB command
Log Y-axis format Maximum value DISP:TRAC{1-3}:Y:TOP on page 372
Minimum value DISP:TRAC{1-3}:Y:BOTT on page 365
Display format Parameter to be set GPIB command
Complex plane format X-axis reference value DISP:TRAC{4-5}:X:RLEV on page 362
Y-axis reference value DISP:TRAC{1-5}:Y:RLEV on page 369
Full-scale value DISP:TRAC{1-5}:Y:FULL on page 367