Specifications

Chapter 17 519
GPIB Command Reference
SYST:IND:POIN:SET
17. GPIB Command Reference
SYST:IND:POIN:SET
Format SYSTem:INDex:POINt:SET
SYSTem:INDex:POINt:SET?
Description Sets the timing of the measurement index signal for every measurement point.
Query response {1|0}<newline><^END>
Related commands SYST:IND:SWE:SET command on page 519
SYST:IND:TIME:SET command on page 521
Front Panel
Equivalents
System - Diagnostic - Properties... - At Point
SYST:IND:SWE:SET
Format SYSTem:INDex:SWEep:SET
SYSTem:INDex:SWEep:SET?
Description Sets the timing of the measurement index signal for every sweep.
Query response {1|0}<newline><^END>
Related commands SYST:IND:POIN:SET command on page 519
SYST:IND:TIME:SET command on page 521
Front Panel
Equivalents
System - Diagnostic - Properties... - At Only Sweep End
Description
1 The timing of the measurement index signal for every
measurement is being selected.
0 (Default) The timing of the measurement index signal for every
measurement is not being selected.
Description
1 The timing of the measurement index signal for every
sweep is being selected.
0 (Default) The timing of the measurement index signal for every
sweep is not being selected.