Specifications

514 Chapter 17
GPIB Command Reference
SWE:TIME:AUTO
SWE:TIME:AUTO
Format [SENSe:]SWEep:TIME:AUTO {ON|OFF|1|0}
[SENSe:]SWEep:TIME:AUTO?
Description Selects the automatic sweep time either by auto setting or by manual setting.
Parameters
Query response {1|0}<newline><^END>
Related commands SWE:TIME command on page 513
Front Panel
Equivalents
Stimulus - Sweep Setup... - Sweep Time: [Auto/Manual]
Description
ON or 1 (Default)
Specifies the auto setting
*1
.
OFF or 0
Specifies the manual setting
*2
.
*1.The shortest sweep time is set of the present setting of E4991A.
*2.By using the SWE:TIME command, sets the sweep time.