Specifications

Chapter 17 513
GPIB Command Reference
SWE:TIME
17. GPIB Command Reference
SWE:TIME
Format [SENSe:]SWEep:TIME <numeric>
[SENSe:]SWEep:TIME?
Description Sets the sweep time.
Parameters
If the specified parameter is outside the range, the minimum (if the lower limit of the range
is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.
Query response {numeric}<newline><^END>
Related commands SWE:TIME:AUTO command on page 514
Front Panel
Equivalents
Stimulus - Sweep Setup... - Sweep Time: [Auto/Manual] - Sweep Time
<numeric>
Description Sweep time
Data type Floating point
Range 0 to approximately. (Nop × 20)
Default 1.45
Resolution 1E-4
Unit s (seconds)