Specifications

Chapter 17 511
GPIB Command Reference
SWE:POIN
17. GPIB Command Reference
SWE:POIN
Format [SENSe:]SWEep:POINts <numeric>
[SENSe:]SWEep:POINts?
Description Sets the number of points measured at each sweep.
Parameters
If the specified parameter is outside the range, the minimum (if the lower limit of the range
is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.
Query response {numeric}<newline><^END>
Front Panel
Equivalents
Stimulus - Sweep Setup... - Number Of Points
<numeric>
Description Number of points
Data type Integer
Range 2 to 801
Default 201