Specifications

484 Chapter 17
GPIB Command Reference
SOUR:VOLT:OFFS:STAT
SOUR:VOLT:OFFS:STAT
Format SOURce:VOLTage[:LEVel][:IMMediate][:AMPLitude]:OFFSet:STATe {ON|OFF|1|0}
SOURce:VOLTage[:LEVel][:IMMediate][:AMPLitude]:OFFSet:STATe?
Description Turns on/off the dc bias output in the voltage sweep mode or fixed voltage source mode.
This command can be used when Option 001 (dc bias function) is installed.
Parameters
Query response {1|0}<newline><^END>
Related commands SOUR:CURR:OFFS:STAT command on page 465
Front Panel
Equivalents
Stimulus - Source... - dc bias: [On/Off]
Description
ON or 1
Turn on the dc bias output.
*1
OFF or 0 (Default) Turn off the dc bias output.
*1.When the dc bias output is converted from on to off, the sweep mode is automatically
set to hold.