Specifications

Chapter 17 483

GPIB Command Reference

SOUR:VOLT:OFFS:STAR

17. GPIB Command

Reference

SOUR:VOLT:OFFS:STAR

Format SOURce:VOLTage[:LEVel][:IMMediate][:AMPLitude]:OFFSet:STARt <numeric>

SOURce:VOLTage[:LEVel][:IMMediate][:AMPLitude]:OFFSet:STARt?

Description Sets the start value in the dc bias voltage sweep range. This command can be used when

Option 001 (dc bias function) is installed.

In addition, use the SOUR:VOLT:OFFS:STOP command to set the stop value of the

sweep range.

Parameters

If the specified parameter is outside the range, the minimum (if the lower limit of the range

is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.

Query response {numeric}<newline><^END>

Related commands SOUR:VOLT:OFFS:STOP command on page 485

Front Panel

Equivalents

Stimulus - Start/Stop... - Start: V

Description Start value in the sweep range

Data type Floating point

Range -40 to 40

Default 0

Resolution 1E-3

Unit V (volt)