Specifications

482 Chapter 17
GPIB Command Reference
SOUR:VOLT:OFFS:SPAN
SOUR:VOLT:OFFS:SPAN
Format SOURce:VOLTage[:LEVel][:IMMediate][:AMPLitude]:OFFSet:SPAN <numeric>
SOURce:VOLTage[:LEVel][:IMMediate][:AMPLitude]:OFFSet:SPAN?
Description Sets the span value in the dc bias voltage sweep range. This command can be used when
Option 001 (dc bias function) is installed.
In addition, use the SOUR:VOLT:OFFS:CENT command to set the center value of the
sweep range.
Parameters
If the specified parameter is outside the range, the minimum (if the lower limit of the range
is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.
Query response {numeric}<newline><^END>
Related commands SOUR:VOLT:OFFS:CENT command on page 481
Front Panel
Equivalents
Stimulus - Start/Stop... - Span: V
<numeric>
Description Span value in the sweep range
Data type Floating point
Range 0 to 80
Default 0
Resolution 1E-3
Unit V (volt)