Specifications

Chapter 17 481

GPIB Command Reference

SOUR:VOLT:OFFS:CENT

17. GPIB Command

Reference

SOUR:VOLT:OFFS:CENT

Format SOURce:VOLTage[:LEVel][:IMMediate][:AMPLitude]:OFFSet:CENTer <numeric>

SOURce:VOLTage[:LEVel][:IMMediate][:AMPLitude]:OFFSet:CENTer?

Description Sets the center value in the dc bias voltage sweep range. This command can be used when

Option 001 (dc bias function) is installed.

In addition, use the SOUR:VOLT:OFFS:SPAN command to set the span value of the

sweep range.

Parameters

If the specified parameter is outside the range, the minimum (if the lower limit of the range

is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.

Query response {numeric}<newline><^END>

Related commands SOUR:VOLT:OFFS:SPAN command on page 482

Front Panel

Equivalents

Stimulus - Start/Stop... - Center: V

Description Center value in the sweep range

Data type Floating point

Range -40 to 40

Default 0

Resolution 1E-3

Unit V (volt)