Specifications

474 Chapter 17

GPIB Command Reference

SOUR:POW:STAR

Format SOURce:POWer:STARt <numeric>

SOURce:POWer:STARt?

Description Sets the start value in the oscillator power level sweep range.

In addition, use the SOUR:POW:STOP command to set the stop value of the sweep

range.

Parameters

If the specified parameter is outside the range, the minimum (if the lower limit of the range

is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.

Query response {numeric}<newline><^END>

Related commands SOUR:POW:MODE command on page 472

SOUR:POW:STOP command on page 475

Front Panel

Equivalents

Stimulus - Start/Stop... - Start: dBm

Description Start value in the sweep range

Data type Floating point

Range -40 to 1

Default -6.9897

Unit dBm