Specifications

Chapter 17 473
GPIB Command Reference
SOUR:POW:SPAN
17. GPIB Command Reference
SOUR:POW:SPAN
Format SOURce:POWer:SPAN <numeric>
SOURce:POWer:SPAN?
Description Sets the span value in the oscillator power level sweep range.
In addition, use the SOUR:POW:CENT command to set the center value of the sweep
range.
Parameters
If the specified parameter is outside the range, the minimum (if the lower limit of the range
is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.
Query response {numeric}<newline><^END>
Related commands SOUR:POW:MODE command on page 472
SOUR:POW:CENT command on page 471
Front Panel
Equivalents
Stimulus - Start/Stop... - Span: dBm
<numeric>
Description Span value in the sweep range
Data type Floating point
Range 0 to 41
Default 6.0206
Unit dBm