Specifications

Chapter 17 471
GPIB Command Reference
SOUR:POW:CENT
17. GPIB Command Reference
SOUR:POW:CENT
Format SOURce:POWer:CENTer <numeric>
SOURce:POWer:CENTer?
Description Sets the center value in the oscillator power level sweep range.
In addition, use the SOUR:POW:SPAN command to set the span value of the sweep
range.
Parameters
If the specified parameter is outside the range, the minimum (if the lower limit of the range
is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.
Query response {numeric}<newline><^END>
Related commands SOUR:POW:MODE command on page 472
SOUR:POW:SPAN command on page 473
Front Panel
Equivalents
Stimulus - Start/Stop... - Center: dBm
<numeric>
Description Center value in the sweep range
Data type Floating point
Range -40 to 1
Default -3.9794
Unit dBm