Specifications

468 Chapter 17
GPIB Command Reference
SOUR:CURR:STAR
SOUR:CURR:STAR
Format SOURce:CURRent:STARt <numeric>
SOURce:CURRent:STARt?
Description Sets the start value in the oscillator current level sweep range.
In addition, use the SOUR:CURR:STOP command to set the stop value of the sweep
range.
Parameters
If the specified parameter is outside the range, the minimum (if the lower limit of the range
is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.
Query response {numeric}<newline><^END>
Related commands SOUR:CURR:MODE command on page 460
SOUR:CURR:STOP command on page 469
Front Panel
Equivalents
Stimulus - Start/Stop... - Start: A
<numeric>
Description Start value in the sweep range
Data type Floating point
Range 0.1 to 10E-3
Default 4E-3
Resolution 0.01E-3
Unit A (ampere)