Specifications

466 Chapter 17
GPIB Command Reference
SOUR:CURR:OFFS:STOP
SOUR:CURR:OFFS:STOP
Format SOURce:CURRent[:LEVel][:IMMediate][:AMPLitude]:OFFSet:STOP <numeric>
SOURce:CURRent[:LEVel][:IMMediate][:AMPLitude]:OFFSet:STOP?
Description Sets the stop value in the dc bias current sweep range. This command can be used when
Option 001 (dc bias function) is installed.
In addition, use the SOUR:CURR:OFFS:STAR command to set the start value in the
sweep range.
Parameters
If the specified parameter is outside the range, the minimum (if the lower limit of the range
is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.
Query response {numeric}<newline><^END>
Related commands SOUR:CURR:OFFS:STAR command on page 464
Front Panel
Equivalents
Stimulus - Start/Stop... - Stop: A
<numeric>
Description Stop value in the sweep range
Data type Floating point
Range -50E-3 to 50E-3
Default 100E-6
Resolution 10E-6
Unit A (ampere)