Specifications

Chapter 17 465
GPIB Command Reference
SOUR:CURR:OFFS:STAT
17. GPIB Command Reference
SOUR:CURR:OFFS:STAT
Format SOURce:CURRent[:LEVel][:IMMediate][:AMPLitude]:OFFSet:STATe {ON|OFF|1|0}
SOURce:CURRent[:LEVel][:IMMediate][:AMPLitude]:OFFSet:STATe?
Description Turns on/off the dc bias output in the current sweep mode or the fixed current source mode.
This command can be used when Option 001 (dc bias function) is installed.
Parameters
Query response {1|0}<newline><^END>
Related commands SOUR:VOLT:OFFS:STAT command on page 484
Front Panel
Equivalents
Stimulus - Source... - dc bias: [On/Off]
Description
ON or 1
Turn on the dc bias output.
*1
OFF or 0 (Default) Turn off the dc bias output.
*1.When the dc bias is turned on from off, the sweep mode is automatically set to hold.