Specifications

464 Chapter 17
GPIB Command Reference
SOUR:CURR:OFFS:STAR
SOUR:CURR:OFFS:STAR
Format SOURce:CURRent[:LEVel][:IMMediate][:AMPLitude]:OFFSet:STARt <numeric>
SOURce:CURRent[:LEVel][:IMMediate][:AMPLitude]:OFFSet:STARt?
Description Sets the start value in the dc bias current sweep range. This command can be used when
Option 001 (dc bias function) is installed.
In addition, use the SOUR:CURR:OFFS:STOP command to set the stop value of the
sweep range.
Parameters
Query response {numeric}<newline><^END>
Related commands SOUR:CURR:OFFS:STOP command on page 466
Front Panel
Equivalents
Stimulus - Start/Stop... - Start: A
<numeric>
Description Start value in the sweep range
Data type Floating point
Range -50E-3 to 50E-3
Default 100E-6
Resolution 10E-6
Unit A (ampere)