Specifications
462 Chapter 17
GPIB Command Reference
SOUR:CURR:OFFS:CENT
SOUR:CURR:OFFS:CENT
Format SOURce:CURRent[:LEVel][:IMMediate][:AMPLitude]:OFFSet:CENTer <numeric>
SOURce:CURRent[:LEVel][:IMMediate][:AMPLitude]:OFFSet:CENTer?
Description Sets the center value in the dc bias current sweep range. This command can be used when
Option 001 (dc bias function) is installed.
In addition, in order to set the span value of the sweep range, the
SOUR:CURR:OFFS:SPAN command is used.
Parameters
If the specified parameter is outside the range, the minimum (if the lower limit of the range
is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.
Query response {numeric}<newline><^END>
Related commands SOUR:CURR:OFFS:SPAN command on page 463
Front Panel
Equivalents
Stimulus - Start/Stop... - Center: A
<numeric>
Description Center value in the sweep range
Data type Floating point
Range -50E-3 to 50E-3-3
Default 100E-6
Resolution 10E-6
Unit A (ampere)