Specifications

Chapter 17 459
GPIB Command Reference
SOUR:CURR:LIM:OFFS
17. GPIB Command Reference
SOUR:CURR:LIM:OFFS
Format SOURce:CURRent:LIMit:OFFSet <numeric>
SOURce:CURRent:LIMit:OFFSet?
Description Sets the dc bias current limit maximum value when the dc bias output mode is set to the
voltage sweep mode or the fixed voltage source mode. This command can be used when
Option 001 (dc bias function) is installed.
Parameters
If the specified parameter is outside the range, the minimum (if the lower limit of the range
is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.
Query response {numeric}<newline><^END>
Related commands Stimulus - Source... - Bias Limit: A
<numeric>
Description dc bias current limit maximum value
Data type Floating point
Range 2E-3 to 50E-3
Default 2E-3
Resolution 0.01E-3
Unit A (ampere)