Specifications

458 Chapter 17
GPIB Command Reference
SOUR:CURR:CENT
SOUR:CURR:CENT
Format SOURce:CURRent:CENTer <numeric>
SOURce:CURRent:CENTer?
Description Sets the center value in the oscillator current level sweep range.
In addition, use the SOUR:CURR:SPAN command to set the span value in the sweep
range.
Parameters
If the specified parameter is outside the range, the minimum (if the lower limit of the range
is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.
Query response {numeric}<newline><^END>
Related commands SOUR:CURR:MODE command on page 460
SOUR:CURR:SPAN command on page 467
Front Panel
Equivalents
Stimulus - Start/Stop... - Center: A
<numeric>
Description Center value in the sweep range
Data type Floating point
Range 0.1E-3 to 10E-3
Default 6.0E-3
Resolution 0.01E-3
Unit A (ampere)