Specifications

Chapter 17 457
GPIB Command Reference
SOUR:CURR
17. GPIB Command Reference
SOUR:CURR
Format SOURce:CURRent[:LEVel][:IMMediate][:AMPLitude] <numeric>
SOURce:CURRent[:LEVel][:IMMediate][:AMPLitude]?
Description Sets the oscillator current level when the sweep parameter is set to frequency sweep, dc
bias voltage sweep, or dc bias current sweep.
Parameters
If the specified parameter is outside the range, the minimum (if the lower limit of the range
is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.
Query response {numeric}<newline><^END>
Related commands SOUR:CURR:MODE command on page 460
Front Panel
Equivalents
Stimulus - Source... - OSC Level: A
<numeric>
Description Oscillator current level
Data type Floating point
Range 0.1E-3 to 10E-3
Default 2.0E-3
Resolution 0.01E-3
Unit A (ampere)