Specifications

446 Chapter 17

GPIB Command Reference

SENS:CORR2:CKIT:STAN2:LIST:R

Format SENSe:CORRection2:CKIT:STANdard2:LIST:R <numeric 1>,<numeric 2>,..,<numeric

SENSe:CORRection2:CKIT:STANdard2:LIST:R?

Description Defines the resistance value (R) of the Short standard of the fixture compensation kit by

using the list setting function.

When using the list setting function, the resistance value (R) of the Short standard, defined

for the calibration data throughout the entire frequency range, is set for the exact number of

measurement points (N).

NOTE The standard value defined by the list setting function can be used when measuring the

fixture compensation data in the user-defined frequency point/user-defined power point.

Parameters

If the specified parameter is outside the range, the minimum (if the lower limit of the range

is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.

Query response {numeric 1}, {numeric 2},.., {numeric N}<newline><^END>

Where N is the number of measurement points.

Related commands SENS:CORR2:CKIT:LIST command on page 440

SENS:CORR2:CKIT:STAN2:LIST:X command on page 447

FORM:DATA command on page 374

Front Panel

Equivalents

Unavailable.

Description Resistance value (R) of the Short standard

Data type Floating point

Range -1E6 to 1E6

Default 0

Unit Ω (ohm)