Specifications

444 Chapter 17

GPIB Command Reference

SENS:CORR2:CKIT:STAN1:LIST:G

Format SENSe:CORRection2:CKIT:STANdard1:LIST:G <numeric 1>,<numeric 2>,..,<numeric

SENSe:CORRection2:CKIT:STANdard1:LIST:G?

Description Defines the conductance value (G) of the Open standard of the fixture compensation kit by

using the list setting function..

When using the list setting function, the conductance value (G) of the Open standard,

defined for the calibration data throughout the entire frequency range, is set for the exact

number of measurement points (N).

NOTE The standard value defined by the list setting function can be used when measuring the

fixture compensation data in the user-defined frequency point/user-defined power point.

Parameters

If the specified parameter is outside the range, the minimum (if the lower limit of the range

is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.

Query response {numeric 1}, {numeric 2},.., {numeric N}<newline><^END>

Where N is the number of measurement points.

Related commands SENS:CORR2:CKIT:LIST command on page 440

SENS:CORR2:CKIT:STAN1:LIST:B command on page 443

FORM:DATA command on page 374

Front Panel

Equivalents

Unavailable.

Description Conductance value (G) of the Open standard

Data type Floating point

Range -1E6 to 1E6

Default 0

Unit S (Siemens)