Specifications

440 Chapter 17
GPIB Command Reference
SENS:CORR2:CKIT:LIST
SENS:CORR2:CKIT:LIST
Format SENSe:CORRection2:CKIT:LIST[:STATe] {ON|OFF|1|0}
SENSe:CORRection2:CKIT:LIST[:STATe]?
Description When executing fixture compensation with the fixture compensation kit, selects whether to
specify the input value with or without using the list setting function on each standard
value of the fixture compensation kit.
When the list setting function is set to on, standard values inputted with the following
commands are used at the time of fixture compensation.
• SENS:CORR2:CKIT:STAN1:LIST:G command on page 444
• SENS:CORR2:CKIT:STAN1:LIST:B command on page 443
• SENS:CORR2:CKIT:STAN2:LIST:R command on page 446
• SENS:CORR2:CKIT:STAN2:LIST:X command on page 447
When the list setting function is set to off, standard values inputted with the following
commands are used at the time of fixture compensation.
• SENS:CORR2:CKIT:STAN1:G command on page 442
• SENS:CORR2:CKIT:STAN1:C command on page 441
• SENS:CORR2:CKIT:STAN2:R command on page 448
• SENS:CORR2:CKIT:STAN2:L command on page 445
Parameters
Query response {1|0}<newline><^END>
Related commands SENS:CORR2:COLL:FPO command on page 450
Front Panel
Equivalents
Unavailable.
Description
ON or 1
*1
Sets the list setting function to on.
OFF or 0 (Default) Sets the list setting function to off.
*1.This can be used only when measuring the fixture compensation data in the
user-defined frequency point/user-defined power point.