Specifications

436 Chapter 17

GPIB Command Reference

SENS:CORR1:CKIT:STAN7:THIC

Format SENSe:CORRection1:CKIT:STANdard7:THICkness <numeric>

SENSe:CORRection1:CKIT:STANdard7:THICkness?

Description Defines the thickness of the Load standard of the calibration kit in dielectric measurement.

This command can be used when Option 002 (material measurement software) is installed.

Parameters

If the specified parameter is outside the range, the minimum (if the lower limit of the range

is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.

Query response {numeric}<newline><^END>

Related commands SENS:CORR1:CKIT:STAN7:PLF command on page 434

SENS:CORR1:CKIT:STAN7:PRE command on page 435

Front Panel

Equivalents

Stimulus - Cal/Comp... - Cal Kit Menu - Thickness

Description Thickness of the Load standard

Data type Floating point

Range -1E6 to 1E6

Default 800E-6

Unit m (meter)