Specifications

Chapter 17 435
GPIB Command Reference
SENS:CORR1:CKIT:STAN7:PRE
17. GPIB Command Reference
SENS:CORR1:CKIT:STAN7:PRE
Format SENSe:CORRection1:CKIT:STANdard7:PREal <numeric>
SENSe:CORRection1:CKIT:STANdard7:PREal?
Description Defines the dielectric constant ratio of the Load standard of the calibration kit in dielectric
measurement. This command can be used when Option 002 (material measurement
software) is installed.
Parameters
If the specified parameter is outside the range, the minimum (if the lower limit of the range
is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.
Query response {numeric}<newline><^END>
Related commands SENS:CORR1:CKIT:STAN7:PLF command on page 434
SENS:CORR1:CKIT:STAN7:THIC command on page 436
Front Panel
Equivalents
Stimulus - Cal/Comp... - Cal Kit Menu - εr Real
<numeric>
Description Dielectric constant ratio of the Load standard
Data type Floating point
Range -1E6 to 1E6
Default 2.1