Specifications

Chapter 17 433
GPIB Command Reference
SENS:CORR1:CKIT:STAN3:R
17. GPIB Command Reference
SENS:CORR1:CKIT:STAN3:R
Format SENSe:CORRection1:CKIT:STANdard3:R <numeric>
SENSe:CORRection1:CKIT:STANdard3:R?
Description Defines the resistance value (R) of the Load standard of a user-defined calibration kit.
Parameters
If the specified parameter is outside the range, the minimum (if the lower limit of the range
is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.
Query response {numeric}<newline><^END>
Related commands SENS:CORR1:CKIT:LIST command on page 421
SENS:CORR1:CKIT:STAN3:L command on page 430
Front Panel
Equivalents
Stimulus - Cal/Comp... - Cal Kit Menu - Load R: (Ω)
<numeric>
Description Resistance value (R) of the Load standard
Data type Floating point
Range -1E6 to 1E6
Default 50
Unit Ω (ohm)