Specifications

432 Chapter 17
GPIB Command Reference
SENS:CORR1:CKIT:STAN3:LIST:X
SENS:CORR1:CKIT:STAN3:LIST:X
Format SENSe:CORRection1:CKIT:STANdard3:LIST:X <numeric 1>,<numeric 2>,..,<numeric
N>
SENSe:CORRection1:CKIT:STANdard3:LIST:X?
Description Defines the reactance value (X) of the Load standard of a user-defined calibration kit by
using the list setting function.
When using the list setting function, reactance value (X) of the Load standard, defined for
the calibration data throughout the entire frequency range, is set for the exact number of
measurement points (N).
NOTE The standard value defined by using the list setting function is available only when
measuring the calibration data in the user-defined frequency point/user-defined power
point.
Parameters
If the specified parameter is outside the range, the minimum (if the lower limit of the range
is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.
Query response {numeric 1}, {numeric 2},.., {numeric N}<newline><^END>
Where N is the number of measurement points.
Related commands SENS:CORR1:CKIT:LIST command on page 421
SENS:CORR1:CKIT:STAN3:LIST:R command on page 431
FORM:DATA command on page 374
Front Panel
Equivalents
Unavailable.
<numeric n>
Description Reactance value (X) of the Load standard
Data type Floating point
Range -1E6 to 1E6
Default 0
Unit Ω (ohm)