Specifications

Chapter 17 421
GPIB Command Reference
SENS:CORR1:CKIT:LIST
17. GPIB Command Reference
SENS:CORR1:CKIT:LIST
Format SENSe:CORRection1:CKIT:LIST[:STATe] {ON|OFF|1|0}
SENSe:CORRection1:CKIT:LIST[:STATe]?
Description When using a user-defined calibration kit for executing calibration, selects whether to
specify the input value with or without the list setting function for each standard value of
the calibration kit.
When the list setting function is set to on, standard values inputted by the following
commands are used at the time of calibration.
• SENS:CORR1:CKIT:STAN1:LIST:G command on page 425
• SENS:CORR1:CKIT:STAN1:LIST:B command on page 424
• SENS:CORR1:CKIT:STAN2:LIST:R command on page 427
• SENS:CORR1:CKIT:STAN2:LIST:X command on page 428
• SENS:CORR1:CKIT:STAN3:LIST:R command on page 431
• SENS:CORR1:CKIT:STAN3:LIST:X command on page 432
When the list setting function is set to off, standard values inputted by the following
commands are used at the time of calibration.
• SENS:CORR1:CKIT:STAN1:G command on page 423
• SENS:CORR1:CKIT:STAN1:C command on page 422
• SENS:CORR1:CKIT:STAN2:R command on page 429
• SENS:CORR1:CKIT:STAN2:L command on page 426
• SENS:CORR1:CKIT:STAN3:R command on page 433
• SENS:CORR1:CKIT:STAN3:L command on page 430
Parameters
Query response {1|0}<newline><^END>
Related commands SENS:CORR1:CKIT command on page 420
SENS:CORR1:COLL:FPO command on page 438
Front Panel
Equivalents
Unavailable.
Description
ON or 1
*1
Sets the list setting function to on.
OFF or 0 (Default) Sets the list setting function to off.
*1.This can only be used when measuring the calibration data in the user-defined
frequency point/user-defined power point.