Specifications

Chapter 17 417
GPIB Command Reference
SEGM:VOLT:OFFS:STAT
17. GPIB Command Reference
SEGM:VOLT:OFFS:STAT
Format [SENSe:]SEGMent:VOLTage:OFFSet:STATe {ON|OFF|1|0}
[SENSe:]SEGMent:VOLTage:OFFSet:STATe?
Description When creating the segment sweep table, selects the voltage mode to set the dc bias level.
This command can be used when Option 001 (dc bias function) is installed.
In addition, use the SEGM{1-16}:VOLT:OFFS command to select the current mode to set
the dc bias voltage level.
Parameters
Query response {1|0}<newline><^END>
Related commands SEGM{1-16}:VOLT:OFFS command on page 416
SEGM{1-16}:CURR:LIM command on page 400
Front Panel
Equivalents
Stimulus - Sweep Setup... - Segment Table Menu - More - Bias Source
Description
ON or 1 Specifies the voltage mode.
OFF or 0 (Default) Specifies the current mode.