Specifications

416 Chapter 17

GPIB Command Reference

SEGM{1-16}:VOLT:OFFS

Format [SENSe:]SEGMent{1-16}:VOLTage:OFFSet <numeric>

[SENSe:]SEGMent{1-16}:VOLTage:OFFSet?

Description When creating the segment sweep table, sets the dc bias voltage level. This command is

available when Option 001 (dc bias function) is installed.

Parameters

If the specified parameter is outside the range, the minimum (if the lower limit of the range

is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.

Query response {numeric}<newline><^END>

Related commands SEGM:VOLT:OFFS:STAT command on page 417

SEGM{1-16}:CURR:LIM command on page 400

Front Panel

Equivalents

Stimulus - Sweep Setup... - Segment Table Menu - More - Bias Level [V]

Sub-block Description

SEGMent {1-16} Specifies the segment number (1 to 16).

Description dc bias voltage level

Data type Floating point

Range -40 to 40

Default 0

Resolution 1E-3

Unit V (volt)