Specifications

410 Chapter 17
GPIB Command Reference
SEGM{1-16}:FREQ:STOP
SEGM{1-16}:FREQ:STOP
Format [SENSe:]SEGMent{1-16}:FREQuency:STARt <numeric>
[SENSe:]SEGMent{1-16}:FREQuency:STARt?
Description When creating the segment sweep table, sets the stop value in the frequency sweep range.
In addition, use the SEGM{1-16}:FREQ:STAR command when setting the start value in
the sweep range.
Parameters
If the specified parameter is outside the range, the minimum (if the lower limit of the range
is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.
Query response {numeric}<newline><^END>
Related commands SEGM{1-16}:FREQ:STAR command on page 409
Front Panel
Equivalents
Stimulus - Sweep Setup... - Segment Table Menu - Stop
Sub-block Description
SEGMent {1-16} Specifies the segment number (1 to 16).
<numeric>
Description Stop value in the sweep range
Data type Floating point
Range 1E6 to 3E9
Default 3E9
Resolution 1E-3
Unit Hz