Specifications

Chapter 17 409
GPIB Command Reference
SEGM{1-16}:FREQ:STAR
17. GPIB Command Reference
SEGM{1-16}:FREQ:STAR
Format [SENSe:]SEGMent{1-16}:FREQuency:STARt <numeric>
[SENSe:]SEGMent{1-16}:FREQuency:STARt?
Description When creating the segment sweep table, sets the start value in the frequency sweep range.
In addition, use the SEGM{1-16}:FREQ:STOP command when setting the stop value in
the sweep range.
Parameters
If the specified parameter is outside the range, the minimum (if the lower limit of the range
is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.
Query response {numeric}<newline><^END>
Related commands SEGM{1-16}:FREQ:STOP command on page 410
Front Panel
Equivalents
Stimulus - Sweep Setup... - Segment Table Menu - Start
Sub-block Description
SEGMent {1-16} Specifies the segment number (1 to 16).
<numeric>
Description Start value in the sweep range
Data type Floating point
Range 1E6 to 3E9
Default 1E6
Resolution 1E-3
Unit Hz