Specifications

408 Chapter 17
GPIB Command Reference
SEGM{1-16}:FREQ:SPAN
SEGM{1-16}:FREQ:SPAN
Format [SENSe:]SEGMent{1-16}:FREQuency:SPAN <numeric>
[SENSe:]SEGMent{1-16}:FREQuency:SPAN?
Description When creating the segment sweep table, sets the span value in the frequency sweep range.
In addition, use the SEGM{1-16}:FREQ:CENT command when setting the center value
in the sweep range.
Parameters
If the specified parameter is outside the range, the minimum (if the lower limit of the range
is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.
Query response {numeric}<newline><^END>
Related commands SEGM{1-16}:FREQ:CENT command on page 407
Front Panel
Equivalents
Unavailable.
Sub-block Description
SEGMent {1-16} Specifies the segment number (1 to 16).
<numeric>
Description Span value in the sweep range
Data type Floating point
Range 0 to 2999E6
Default 2.999E9
Resolution 1E-3
Unit Hz