Specifications

404 Chapter 17

GPIB Command Reference

SEGM{1-16}:DATA

If the specified parameter is outside the range, the minimum (if the lower limit of the range

is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.

NOTE It is necessary to set the parameters of numeric 6 and numeric 7 when Option 001 (dc bias

function) is not installed or dc bias is not applied to the DUT. In this case, set default values

such as 100uA and 1V to the parameters of numeric 6 and numeric 7, respectively.

Query response {numeric 1},{numeric 2},..,{numeric 7}<newline><^END>

Related commands SEGM:CURR:STAT command on page 402

SEGM:POW:STAT command on page 412

SEGM:VOLT:STAT command on page 418

SEGM:CURR:OFFS:STAT command on page 399

SEGM:VOLT:OFFS:STAT command on page 417

Front Panel

Equivalents

Unavailable.

Default

voltage:

100E-3

current:

2E-3

power:

-13.01

voltage:

current:

100E-6

current:

2E-3

voltage:

Unit V/A/dBm V/A A/V