Specifications

Chapter 17 401

GPIB Command Reference

SEGM{1-16}:CURR:OFFS

17. GPIB Command

Reference

SEGM{1-16}:CURR:OFFS

Format [SENSe:]SEGMent{1-16}:CURRent:OFFSet <numeric>

[SENSe:]SEGMent{1-16}:CURRent:OFFSet?

Description When creating the segment sweep table, sets the dc bias current level. This command is

available when Option 001 (dc bias function) is installed.

Parameters

If the specified parameter is outside the range, the minimum (if the lower limit of the range

is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.

Query response {numeric}<newline><^END>

Related commands SEGM:CURR:OFFS:STAT command on page 399

SEGM{1-16}:VOLT:LIM command on page 415

Front Panel

Equivalents

Stimulus - Sweep Setup... - Segment Table Menu - More - Bias Level [A]

Sub-block Description

SEGMent {1-16} Specifies the segment number (1 to 16).

Description dc bias current level

Data type Floating point

Range -50E-3 to -100E-6, 100E-6 to 50E-3

Default 100E-6

Resolution 10E-6

Unit A (ampere)