Specifications

400 Chapter 17

GPIB Command Reference

SEGM{1-16}:CURR:LIM

Format [SENSe:]SEGMent{1-16}:CURRent:LIMit <numeric>

[SENSe:]SEGMent{1-16}:CURRent:LIMit?

Description When creating the segment sweep table, sets the dc bias current limit maximum value. This

command is available when Option 001 (dc bias function) is installed.

Parameters

If the specified parameter is outside the range, the minimum (if the lower limit of the range

is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.

Query response {numeric}<newline><^END>

Related commands SEGM:VOLT:OFFS:STAT command on page 417

SEGM{1-16}:VOLT:OFFS command on page 416

Front Panel

Equivalents

Stimulus - Sweep Setup... - Segment Table Menu - More - Bias Limit [A]

Sub-block Description

SEGMent {1-16} Specifies the segment number (1 to 16).

Description dc bias current limit maximum value

Data type Floating point

Range 2E-3 to 50E-3

Default 2E-3

Resolution 0.01E-3

Unit A (ampere)