Specifications

398 Chapter 17

GPIB Command Reference

SEGM{1-16}:CURR

Format [SENSe:]SEGMent{1-16}:CURRent[:LEVel] <numeric>

[SENSe:]SEGMent{1-16}:CURRent[:LEVel]?

Description When creating the segment sweep table, sets the oscillator current level.

Parameters

If the specified parameter is outside the range, the minimum (if the lower limit of the range

is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.

Query response {numeric}<newline><^END>

Related commands SEGM:CURR:STAT command on page 402

Front Panel

Equivalents

Stimulus - Sweep Setup... - Segment Table Menu - More - Osc Level: A

Sub-block Description

SEGMent {1-16} Specifies the segment number (1 to 16).

Description Oscillator current level

Data type Floating point

Range 0.1E-3 to 10E-3

Default 2E-3

Resolution 0.01E-3

Unit A (ampere)