Specifications

396 Chapter 17
GPIB Command Reference
SEGM{1-16}:AVER:COUN
SEGM{1-16}:AVER:COUN
Format [SENSe:]SEGMent{1-16}:AVERage:COUNt <numeric>
[SENSe:]SEGMent{1-16}:AVERage:COUNt?
Description When creating the segment sweep table, sets the point averaging factor.
Parameters
If the specified parameter is outside the range, the minimum (if the lower limit of the range
is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.
Query response {numeric}<newline><^END>
Front Panel
Equivalents
Stimulus - Sweep Setup... - Segment Table Menu - Point Average
Sub-block Description
SEGMent {1-16} Specifies the segment number (1 to 16).
<numeric>
Description Point averaging factor
Data type Integer
Range 1 to 100
Default 1