Specifications

Chapter 17 379
GPIB Command Reference
FREQ:STOP
17. GPIB Command Reference
FREQ:STOP
Format [SENSe:]FREQuency:STOP <numeric>
[SENSe:]FREQuency:STOP?
Description Sets the stop value in the frequency sweep range (linear/log sweep).
In addition, use the FREQ:STAR command to set the start value in the sweep range.
Parameters
If the specified parameter is outside the range, the minimum (if the lower limit of the range
is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.
Query response {numeric}<newline><^END>
Related commands FREQ:STAR command on page 378
Front Panel
Equivalents
Stimulus - Start/Stop... - Stop: Hz
<numeric>
Description Stop value in the sweep range
Data type Floating point
Range 1E6 to 3E9
Default 3E9
Resolution 1E-3
Unit Hz