Specifications

378 Chapter 17
GPIB Command Reference
FREQ:STAR
FREQ:STAR
Format [SENSe:]FREQuency:STARt <numeric>
[SENSe:]FREQuency:STARt?
Description Sets the start value in the frequency sweep range (linear/log sweep).
In addition, use the FREQ:STOP command to set the stop value in the sweep range.
Parameters
If the specified parameter is outside the range, the minimum (if the lower limit of the range
is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.
Query response {numeric}<newline><^END>
Related commands FREQ:STOP command on page 379
Front Panel
Equivalents
Stimulus - Start/Stop... - Start: Hz
<numeric>
Description Start value in the sweep range
Data type Floating point
Range 1E6 to 3E9
Default 1E6
Resolution 1E-3
Unit Hz